Glazed tile equipment is divided into three parts, roller forming part, partial pressure, cut knife. Roller forming part is driven by the motor, the chain drives the roller rotation.

The roller forming part is composed of motor drive, chain drive each roller rotation. Pressure type is part of the hydraulic cylinder drives the mold move, can put the Caigang pressure into many sections, the shape of glazed tile. The cutting knife is driven by the hydraulic cylinder to move the cutter up and down, and the color steel tile can be cut off.

The production process is as follows: color steel plate into the roller forming part, forming to pressure parts, pressure, etc., from section to section of, cutter is responsible for fixed length cutting.

Introduction control

The executive part of the inverter drive motor, hydraulic station motor, pressure type of the two hydraulic solenoid valve, cut the two hydraulic solenoid valve.

Testing part is: pulse encoder for detecting colour steel tile length, pressure type travel switch, cut the knife under the travel switch and pressing the operation button, cutting knife Travel button, emergency stop switch, hydraulic open stop switch and so on.

PLC selection of KDN-K3 series of KDN-K306-24AR. It comes with 14 input /10 relay outputs, which exactly meet the input and output requirements. Re equipped with KDN text screen, you can complete the parameter settings, alarm display, help information, production data display, etc..

Tile press has many parameters to be set, with text screen settings. Parameter setting has two kinds of equipment parameters and user parameters. Equipment parameters are: single pulse length, impulse, pressure type, pressure type time, cutting time and so on. The user parameters are: number, length, the first section, distal, pitch, pitch number etc..

Glazed tile press machine control system can complete the function of veneer cutting.